Installing FFEdit for the Steam version

Started by moni, June 12, 2009, 05:12:43 PM

Previous topic - Next topic

moni

Hello!

I decided to look into the problem myself and did find out how to install FFEdit for the Steam version of Freedom Force.

The problem : the FFEdit installer expects a registry key to exist; the one set up when installing the boxed version of Freedom Force.

HKEY_LOCAL_MACHINE\SOFTWARE\Electronic Arts\EA Distribution\Freedom Force\ergc

It looks for the above.

Strangely enough, Steam does set up some registry keys which look "official" enough. It puts them here :
HKEY_LOCAL_MACHINE\SOFTWARE\Irrational Games\Freedom Force

Makes more sense than the EA path, really. In any case, as long as the "ergc" key exists, the installer is happy. It doesn't care about values or anything else apparently. That is, the setup will still install in the usual path and not the new Steam path, so be sure to check that. I'm pretty sure it needs to be installed on top of the game.


As for what you need... here!

http://www.mediafire.com/file/ygztwf2nyxx/ff_reg_keys.reg

It's a registry file. Double click it and it will create the required keys in the Windows registry after a safety prompt.

Here's the "code" it contains. It might only require the very last line but this is the version I used and saw working, so I'm not taking chances ;)

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Electronic Arts\EA Distribution\Freedom Force]
"Game"="fforce.exe"
"GUID"=hex:4f,01,a5,04,94,b9,b7,48,ae,2b,75,22,a2,f1,56,80
"InstallDir"="c:\\program files\\valve\\steam\\steamapps\\common\\freedom force"

[HKEY_LOCAL_MACHINE\SOFTWARE\Electronic Arts\EA Distribution\Freedom Force\ergc]





I will look into the requirements for FF2 once I'm done with the game.

And an additional note : has anyone ever had a corrupt campdef.dat? Seems it happened just after installing FFEdit and looking around a bit (create a single new map, that's it).


Previsionary

#1
FF1 actually shipped with a registry program, so I think that was a problem they knew about at one point in time. As for the corrupted campdef.dat file, it happens when you hit the "campaign" tab in ffedit for ff1. To fix it, just erase the dat.
Disappear when you least expe--

Gremlin


moni

#3
Previsionary : I see... I'll have to avoid this tab then :)

Gremlin : Just giving back what I can to the community ;)

== UPDATE ==

The mod tools for FF2 work fine without any tinkering, yay!

Panther_Gunn

Now the real question:  will Character Tool work??   :unsure:
The Best There Is At What I Do......when I have the time.

moni

It installed without a problem days ago :). In the end, only FFEdit for FF was being a pain.

Panther_Gunn

My apologies if this was already discussed and I missed it.

Which Character Tool are we talking here, the one for the first game, the one for FFVTTR, or a new version of either that comes with the Steam version of the games?  Is this an install on Vista or XP SP2+?  Mark me as very curious, and hesitantly hopeful.
The Best There Is At What I Do......when I have the time.

moni

I can only relate what I have experienced but here it is :

I bought the Freedom Pack on Steam (FF and FFvt3r)
I installed the Character Tool for FF
I used the trick described in this thread to install FFedit for FF
I installed the FFvt3r Mod Tools (includes Character Tool 2, FFedit and nifconvert)

Summary : everything released officially works so far. Have I missed something?

mbrett

Hey, I'm a bit of a noob here. I'm running Vista 64, and when I used your reg file I still cannot use FFEdit. The computer still asks me to load the game first. I know I'm most likely doing something very basic wrong but I truly know very little about editing registry keys. Please help!

moni

It seems you managed to make it work after all? (cf other thread). Mind telling how you fixed it so others who are stuck can do it easily? :)

mbrett

Sure thing. I downloaded an .iso torrent of the game and loaded that first. After it loaded via the 'cd',I took the FFedit files from that folder and put them in the steam FF directory.

So, yes you need to purchase a cd or download an .iso if you continue to have problems. After that it's all cream cheese.

Well, gotta go. Spidey has some more alien clobbering to do!

Retro42

Any advice for someone running Windows 7 64bit?

I got the ffvt3r tools but I can't install ffEdit for the original at all....

SixNapoleons

The link to the registry key doesn't work. Anywhere else I can get it? Thanks in advance.

SupaheroTV

the link doesn't work. can anyone show an simple tutorial on how to install this please :banghead:

burnerboy32uk

having the same problem
was able to install mod tools for  :ff:
but have had no luck in doing the same for :ffvstr:
:banghead:

Damman

if someone have these regkeys, please share. have been looking for a fix for this, very long time now :(

hope you can help, many thanks

Damman

GogglesPizanno

I was going through my Hard Drive today and came across this... hopefully this is what you need.

Reg code for  :ffvstr:

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Irrational Games]

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Irrational Games\FFVTTR]
"GUID"=hex:5a,1d,ff,11,74,24,3e,4b,ba,5f,0d,03,c2,5e,8e,88
"GameExe"="c:\\program files\\valve\\steam\\steamapps\\common\\Freedom Force vs The 3rd Reich\\ffvt3r.exe"
"InstallDir"="c:\\program files\\valve\\steam\\steamapps\\common\\Freedom Force vs The 3rd Reich"
"SourceDir"="j:"
"ADMIN_RIGHTS"="SECUROM_ERR_ADMIN_RIGHTS"
"NO_DISC"="SECUROM_ERR_NO_DISC"
"NO_DRIVE"="SECUROM_ERR_NO_DRIVE"
"TITLEBAR"="SECUROM_ERR_TITLEBAR"
"WRONG_DISC"="SECUROM_ERR_WRONG_DISC"
"EMULATION_DETECTED"="SECUROM_ERR_EMULATION_DETECTED"
"AUTH_TIMEOUT"="SECUROM_ERR_AUTH_TIMEOUT"
"NO_ORIG_FOUND"="SECUROM_ERR_NO_ORIG_FOUND"
"Game"="ffvt3r.exe"



Reg Code for  :ff:


[HKEY_LOCAL_MACHINE\SOFTWARE\Electronic Arts\EA Distribution\Freedom Force]
"Game"="fforce.exe"
"GUID"=hex:4f,01,a5,04,94,b9,b7,48,ae,2b,75,22,a2,f1,56,80
"InstallDir"="c:\\program files\\valve\\steam\\steamapps\\common\\freedom force"

[HKEY_LOCAL_MACHINE\SOFTWARE\Electronic Arts\EA Distribution\Freedom Force\ergc]

Cardmaster

Sorry if this is stupid of me, but could someone write down a step-by-step of what I need to do with that long scary looking chunk of code.  :blink:
Sah-WEEEEET!
www.ericstirpe.com

GogglesPizanno

#18
You should just be able open up notepad, paste the code you need (ff or ffvtr) and save the file as "filename.reg" (with filename being anything you want just make the extension .reg as opposed to a .txt file)

Windows should recognize it as a registry file, so that when double clicking it, it will add the code into the registry.

DISCLAIMER: I just pulled this from the forums and haven't used it myslef as I'm still using XP and installs form a disk. Messing with the registry can do bad things to a machine, so use at your own risk.

Cardmaster

Ohhh interesting. Yipes. Maybe I'll just wait till the next time I go to my parent's place and reinstall FF from a disc, ha.

Thanks Goggles. ^_^

-CM :cardmaster
Sah-WEEEEET!
www.ericstirpe.com

burnerboy32uk

Thank you for the information.
One other question:
From the info you posted
"GameExe"="c:\\program files\\valve\\steam\\steamapps\\common\\Freedom Force vs The 3rd Reich\\ffvt3r.exe"
"InstallDir"="c:\\program files\\valve\\steam\\steamapps\\common\\Freedom Force vs The 3rd Reich"
my computer has steam in "C:\Program Files (x86)\Steam\steamapps\common\freedom force vs. the 3rd reich"
my question is would i then change the above two lines to:
"GameExe"="c:\\Program Files (x86)\\steamsteam\\steamapps\\common\\Freedom Force vs The 3rd Reich\\ffvt3r.exe"
"InstallDir"="c:\\program files (x86)\\steam\\steamapps\\common\\Freedom Force vs The 3rd Reich"

herowithoutacape

I installed the Steam version of both games last night, and I can't get the ffvt3r mod tools to install; none of the reg fixes have helped. I'm running Windows 7 32-bit. Anybody have any workarounds?
Me, I'm dishonest, and a dishonest man you can always trust to be dishonest. Honestly, it's the honest ones you want to watch out for, because you can never predict when they're going to do something incredibly...stupid. - Captain Jack Sparrow
[img]http://pic1.picturetrail.com/VOL126/1138166/214

skeek420

#22
I need help with this as well for  :ffvstr:

i even resorted to the risk of adding to the registry, but after pasting that information to notepad and saving it as a .reg file, it still doesn't work. When I doubleclick the file, an error says "Cannot Import (.reg file name/location): The specified file is not a registry script. You can only import binary registry files from within the registry editor."

this is for win7 64-bit, I figured I might as well just add to an older topic instead of making yet another post about this issue. forum search shows there's been quite a few already.

EDIT: got it to work, i think the issue might be trying to install the editor on a modded FFvsTR. reinstalled the game, so there was no FFX, etc. and mod tools installed without a hitch.

spydermann93

Does anybody have this download still? The link is broken.

I can't get FFEdit to install for :ff:

Nonevend

I finally got FFEdit to install. Somebody from an older thread suggested extracting the installer and looking for the full .exe there (it wasn't). But on the upside, it did cause me to open up the extracted files with Notepad, and one just so happened to give me exactly the information I needed.

See, the keys posted in the thread are fine--the installer notices the "ergc" and understands that the game is installed. But then it looks for a second key to find the install directory. And if it doesn't find it, the installer tells you that the game isn't installed correctly and boots you out.

Adding this key should (might) do the trick.
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Irrational Games\Freedom Force]
"InstallDir"="c:\\program files\\valve\\steam\\steamapps\\common\\freedom force"


I suppose you can change the install directory if you want.

darabka

I am using Windows 7 64 bit. how would the code look like? Also I just need the Standard_e.DLL, if someone could upload that that would be awesome.

heroidosilencio

The file was deleted.
Could you post it again??

Julio_Thomas

I'm having the same issue now, too. I've tried all of the Registry fixes, and none of them are working.

Thoughts?????

Cyber Burn

http://www.alexff.com/goodies.php

Have you tried the FFvt3R Mod Tools located at Alex's Freedom Fortress?

TangledLionX

Hey, Does anyone know how to do this on Windows 10? For Context's sake I have already tried ALL of the codes here, to no avail.I am attempting to do this for :ff: so the  :ffvstr: Mod Tools won't work as far as I know. The Main Reason I'm Attempting this is that FFX Seems like it will be at its most customizable with FFedit Installed, So Any Alternatives would also be appreciated.

Thanks!