I've asked for a few characters over the years, and was able to get a few thanks to some good people here.
With the state of the forum and the creators here, this will probably be my final request to see if I can get some characters created. I'm not hoping for too much to be done, but anything answered would be nice.
So, one last time, for all the good old times....
1) DC -
a) I've got a Travis from the Warlord series, but no other characters
2) Marvel -
Missing Link #2 - Hulk # 105 - https://www.marvel.com/comics/issue/8990/incredible_hulk_1962_179
Pysclop - Avengers #88 - http://www.marvunapp.com/Appendix2/psyklophulk.htm
Kaluu - http://www.marvunapp.com/Appendix7/kaluu_drs.htm
Tyrannus - Hulk#5 - https://3.bp.blogspot.com/-W4ijkByg6Ho/VgQVkhOjWpI/AAAAAAAASZ4/H_bT2y6_FMU/s1600/Tyrannus%2Bby%2BJohn%2BDouglas.jpg
Zom - Strange Tales # 156 - http://www.marvunapp.com/Appendix/zom.htm
Yandroth - Strange Tales #164 - https://www.pinterest.com/pin/851672979513125810/
Calizuma - Defenders #2 - http://marvel.wikia.com/Calizuma_%28Earth-616%29
Karthon the Questor - Sub Mariner #9 - http://www.marvunapp.com/Appendix2/karthonquester.htm
Naga - Sub Mariner #9 - http://www.marvunapp.com/Appendix2/nagalemurian.htm
3) Other -
A) Jonny Quest - Jade would be nice
B) Birdman - Birdgirl!
C) Space Ghost - Metallus
D) Blackstar - Trobbits, the Vizier
E) Pirates of Dark Water - Ren, Tula, Ioz, Niddler. Bloth
F) Conan the Adventurer - Conan, Needle, Zula, Jesmine, Greywolf, Snagg, Falkenar, Wrath Amon, Skulkar, Windfang, Mesmira, Dregs
Thanks for even looking at the list
When I've finished this pack I'm working on I'll look at some of these. I'm pretty sure I have some of them partially done anyway.
Thanks Dean
To add a little more -
Smart Alec Hex by Flash22798
Dreadstar
Ulysses Bloodstone
A couple of these have been done, but not all that I know of;
I've got an Elric mesh by Zuludelta, based off of the taskmaster_cordless mesh, with a skin by Kommando from back in '03. Or were you looking for something more updated?
That's the probably the only one ever done. That'll be fine if you can send it over.
Sent
Flash Gordon - I've got a couple of different Flash's and Can probably make some of the classic ships I though there were a few of the other characters out there for FF but couldn't find them.
So - Dale, Zarkov, Ming, Princess Aura, Prince Barin, the hawkmen, etc
Buck Rogers - the 1979 version. I can do the starfighters and maybe the pirate ships, the Asimov, Ranger 3, and Twiki.
So - Buck, Wilma, Dr Huer, Princess Ardalla, Kain, Tiger Man, Hawk, etc
I've done a couple of teens.
(https://i.imgur.com/yxXXpPw.png)
In my DC folder.
Thanks Dean!
I take it that's Clark Kent, Dick Grayson and Pete Ross, correct?
Correct :thumbup:
Updated the 1st post to remove the male teens.
Panther - checked my aol email and didn't see Elric. Sent to my aol email acount with my forum name up front?
Yup, sent on the 12th @ 10:13 p.m. (PST). Pulled the address from a list of addresses I've used in the past to avoid typos. It had a Subject (Elric), but no text in the body.
Haven't gotten any Undeliverable errors or other kick-backs.
I'll check again, but didn't see it anywhere
Thanks
Panther - found it - it was in spam since it didn't like the file link
I was able to grab it - thanks!
I'm looking at blackstar and was thinking is there anything that could be used as his distinctive sword? Doubles up for overlord too.
Great news Dean!
I might be able to modify an existing sword in Blender. If I remember the Overlord's sword was just a mirror image of the other one since they were two halves of a whole.
Another small update to the 1st post removing Blip
If you can do the sword i'll start the skopes/skins :thumbup:
I'll start work on it tomorrow I think. Shouldn't be too difficult I think.
I have the blackstar AND HERE IS THE FILE!
(https://i.imgur.com/SFRqAgM.png)
THE SWORD OF BLACKSTAR (https://www.mediafire.com/file/5ulu9zvkg0bm32v/SWORD.rar/file)
I have some characters lined up from the initial list:
Tamara
Mara
Zula
Good job Cranlox!. Dean, that looks pretty good and should be what you need
I'm lurking here today. I'm not familiar enough with the characters to be comfortable making them though. I was making a Blackstar along with He-Man (modelled that sword like 2 years ago and it's sitting on my thumb drive) but someone else started one here so I halted mine to focus on other things, MOTU and TMNT mainly. Animating nunchaku chains manually, let me tell you about that nightmare sometime. Literally what's the hold up on all that.
I know who Dorma is, I read some of those books. I considered a model back when but also scrapped it to work on other stuff. Looking at the design you could easily just texture one of Gren's girls. All you would need is a scalloped collar piece which I believe is on one of Tommyboy's DC or Marvel Atlantean characters. "Maybe" Ocean Master?
One of my Lanterns or more has a head though exactly like that Psyklop you could just swap. I remember I made those Nif's so that the heads are separate from everything so they can be skoped easily to other bodies. You'll have to scroll but it will be the one with the big eyeball, obviously.
thanks SA. I'll put it on the list of things to look at if no else does.
I've finished blackstar and overlord, but having trouble getthing the sword texture to show.
(https://i.imgur.com/06ro3pa.png)
I will add it to my random folder and anybody can tinker with them.
Great Dean. I'll take a look.
Dean - fixed the Blackstar nifs and sent them back to you
the sword was looking for the texture in a folder on Cranlox's harddrive - without the folder the texture wasn't showing.
Also, on Overlord, there was a male_basic_lightmap attached to it, making the sword very shiny. Removed the reference to the lightmap and both characters look good now.
In nifscope, sometimes you can't see what you need to see in normal "tree" view of the nif.
up top under the view tab, change "block list" from "show blocks in tree" to "show blocks in list" and you can see more data for extra pieces like the sword that you couldn't see before. Change it back to "tree" view for normal viewing
Awesome job on both by the way!
Updated the top entry to reflect the new characters.
Working on Tamara
(https://i.imgur.com/5954lhH.png)
Great Cranlox. Keep it up!
Thank you. I've updated the files in my folder, I'm hoping to release some stuff tomorrow.
Great Dean! Looking forward to what you've got coming
Working on a few things.
I've got a male and female firefighter done in Sims3, ready for export. Waiting to see what comes up on his hard drive.
I've also put a Linda Lee Danvers (Supergirl) together pictured as above
(https://i.postimg.cc/g2gWB44b/firefighter-M.jpg) (https://postimages.org/)
(https://i.postimg.cc/vBVwTyyG/firefighter-F.jpg) (https://postimages.org/)
(https://i.postimg.cc/gJCXLG6s/Linda.jpg) (https://postimages.org/)
I'm going to do take a look at their pets to see if I can make the dog form of Goliath from HB's Young Samson and Goliath.
Last one I can think of for now might be Nancy from the Shazzan cartoon. I'll see what I can put together.
Dean, and speaking of Young Samson..... can I talk you into doing a quick reskin on your teen Clark Kent secret identity?
I'm trying to get the secret identity set going on Samson and Goliath. Teen Samson, Goliath in dog form, and the red scooter.
And for Shazzan, Chuck. I would say Nancy but I know you're not comfortable doing females. I f I get them, I can put them on the flying camel I already did.
If you can't I'll try to make one in Sims 3 but yours would be better I'm sure. If I can get a good Goliath he might need a quick reskin as well.
(https://i.pinimg.com/1200x/18/8a/0f/188a0f68729f0f855c777ff1b6d9da32.jpg)
(https://www.dvdtalk.com/reviews/images/reviews/279/1337905974_1.jpg)
Yea I'll add them to my list :D
Hello!
On the online side I found a fire chiefs hat on model resources in case you want to change it to your model. It is under the name Fire Chief.
From what I have in stock on my disk I found a
The firefighter file that I have is a masculine one that won't let me export it to nifskope. If you want, I'll send it to you tomorrow. It tells me that it is not triangled, I have no idea what the program is talking about.
The versions are excellent, although I don't know if they have much variation in gestures. Maybe you can make different skins to give the impression of different firefighters.
Thanks Dean!
"Triangled" might mean the poly shape. While most meshes use 3 sided triangles to form the mesh, some use 4 sided faces. I guess nif doesn't like that.
Alternate skins for the firefighters might be doable. Sims 3 lets you set the skin and hair tone for any character made. It would just take multiple checks in game.
Though I think a skinner could easily recolor the base skin.
Wow, those are looking really good, RD
Dana
Thanks Dana. Standard Sims3 quality on those.
Updated the first page to remove a few characters that are done.
Adding some new ones. Surprised a bit that they haven't been done.
We have a Xena, and that's it.
How about; Gabrielle, Ares, Joxer, Callisto, Hercules, Iolaus, the Sovereign, Zeus, Hera, Autolycus, Nebula, Morrigan and Salmoneus.
C) Birdman - Birdgirl!
I think they are both already
I've got a couple of Birdman, the hawk Avenger, Birdboy, and some villains. I've never seen Birdgirl though
Iv'e added my birdman/birdboy to my random folder, i do have a birdgirl started but nowhere near finished.
Great Dean. Some more HB characters are always welcome
My version of Tamara from Submariner that you requested.
(https://i.imgur.com/OC5bTDP.gif)
HERE (https://www.mediafire.com/file/deof0afccgogrvp/616_Tamara_from_Submariner.rar/file)
The skirt has honestly complicated me greatly.
It could be much better.
But my knowledge only goes there.
Maybe someone can give it a better finish.
Thanks Cranlox. I'll look at it this weekend.
That character KALUU seems very cool. It would be great to see him here around.
We don`t have much asian characters. :thumbup:
I've took a lot of liberties with this one, most of the work is thanks to SA.
Batwing luke fox.
(https://i.imgur.com/vunSOpN.png)
In my Dc folder.
Thanks Dean! Thanks SA!
Pictures are blocked at work but I'm sure it's great. Checking it out when I get home.
I am also interested in this obscure characters from marvunapp page. If I had time some day...
Updated the 1st post to remove completed projects. Thanks everyone!
Update the lists again to remove some of the characters that have been done.
Its great to have people still creating new content, plus finding old missing files
Someone did the evil wizard from Warlord. Dean?
Yes I have, I'll try and get him uploaded later.
Great Dean!
Deimos is in my Dc folder.
Quote from: Randomdays on November 26, 2023, 03:58:37 PMThanks Dean!
"Triangled" might mean the poly shape. While most meshes use 3 sided triangles to form the mesh, some use 4 sided faces. I guess nif doesn't like that.
Alternate skins for the firefighters might be doable. Sims 3 lets you set the skin and hair tone for any character made. It would just take multiple checks in game.
Though I think a skinner could easily recolor the base skin.
I'm still learning things, but it looks like Blender has a Triangulate function which can convert quad meshes to triangles.
Thanks Kommando. I'll have to look into that
And thanks Dean!
Quote from: Randomdays on April 15, 2024, 06:48:36 PMThanks Kommando. I'll have to look into that
And thanks Dean!
Please do. Porting stuff from Sims 3 is something that could be really interesting.
Sims 3 isn't the issue, it was something that Cranlox had sent me from somewhere else.
If you check out my main thread, I've already brought some designs that I made in Sims 3 into Freedom Force
From Shazzan - Shazzan, Chuck, and Nancy
From Dinoboy - Dinoboy
From DC - Civilian identities for Diana Prince and Linda Lee Danvers.
I've got the Sims 3 fire Fighters and a couple of others lined up to bring in.
amazing batwing
Going through Archie's Mighty Crusaders and friends, I think I found everything but a couple;
1) Darkling and Baron Gestapo From Daglob. I've got one of the Baron by DJ though.
I think almost all the heroes are covered except for a few female versions that came out, like a female Shield and one named War Eagle. I don't think anyone has done these.
To add a few more (small hope, I know)
Arion - https://en.wikipedia.org/wiki/Arion_(character) (https://en.wikipedia.org/wiki/Arion_(character))
Fafrd and the Grey Mouser - https://en.wikipedia.org/wiki/Sword_of_Sorcery (https://en.wikipedia.org/wiki/Sword_of_Sorcery)
Amethyst - I found a thumbnail pic on the "Electric Freedom" archive, so I know it was done at least once.
https://en.wikipedia.org/wiki/Amethyst,_Princess_of_Gemworld (https://en.wikipedia.org/wiki/Amethyst,_Princess_of_Gemworld)
Omega Men - Dr Ruina did their main enemies - the citadelians, but no one has done the good guys
https://en.wikipedia.org/wiki/Omega_Men (https://en.wikipedia.org/wiki/Omega_Men)
On Dreadstar, besides him, I found some thumbnails for Willow so I know they've been done
I like all these characters. I didn't know there was a version of Fahrd and the Gray Mouser in DC Comics.
Claw should be easy to doing. It's a Conan copy with a claw.
https://www.writeups.org/claw-the-unconquered-dc-comics-barbarian/
A few more that I missed the first time -
Nightmaster - https://en.wikipedia.org/wiki/Nightmaster (https://en.wikipedia.org/wiki/Nightmaster)
Beowulf - https://en.wikipedia.org/wiki/Beowulf_(DC_Comics) (https://en.wikipedia.org/wiki/Beowulf_(DC_Comics))
Hercules Unbound - https://www.comicbookaddicts.com/2020/07/hercules-unbound-1-dc-comics-comic-covers/ (https://www.comicbookaddicts.com/2020/07/hercules-unbound-1-dc-comics-comic-covers/)
Doc -
1) most of these were short series that didn't sell well, though Amethyst pops up now and then.
2) Claw - I was thinking the same thing, with the white fur cloak and loin cloth
3) And on a side note, you were working on a Spider- Woman from Space Ghost a while back, and the picture you put up looked pretty good. Was that ever finished released? https://www.artnet.com/artists/hanna-barbera-studios/space-ghost-black-widow-aka-spider-woman-0mKI3YurDm3mi8igzIOvYw2 (https://www.artnet.com/artists/hanna-barbera-studios/space-ghost-black-widow-aka-spider-woman-0mKI3YurDm3mi8igzIOvYw2)
Don't think I have ever seen a DC version of Hercules. I thought I had an Arion, but can't seem to locate it. It might be a request I made a loooong time ago.
I do have bearded's oedi-puss mesh with skin by Kommando. I think that is the one from NPI. I'm still looking for Dreadstar and Willow.
Thanks WyldeFyre. Anything found would be great.
I think almost all of these have never been done.
As Doc said on Claw, he might be doable be doing some changes to a Conan mesh.
A lot of these was mentioned as part of the DC "implosion" where they made a lot of new titles, they didn't sell, and then most were quickly canceled.
Yes, here it is. My Spider-Woman (or Black Widow) wasn't perfect, but I think it's usable. https://www.mediafire.com/file/2eplhrqyfte10ou/Spider_Woman.rar/file
I have a version of Nightmaster. I think the author is ks_saints with a mesh by Tommyboy.
I have uploaded it in my mediafire: https://www.mediafire.com/file/hfi5besqs6pdca0/Nightmaster.zip/file
Doc,
Your Spider Woman is great! Thank you! The council of Doom is almost complete!
(https://i.postimg.cc/05Vv9633/Spider-Woman.jpg) (https://postimages.org/)
Thanks for the Nightmaster as well.
You said you stopped on Metallus due to the helmet. I threw one together from the Silent Knight skope. Not perfect but I think its usable. Its on the megasite in the "requests" folder.
(https://i.postimg.cc/GpK7vDkn/Metallus.jpg) (https://postimages.org/)
Thanks again!
Yes, I got frustrated with the helmet. I have the Silent Knight mesh, and I think that helmet is something different. But this holiday I can make another attempt. The council of doom must be completed. And I think Metallus is the most competent and dangerous in that council, right?
That is the silent Knight helmet - I just edited it a bit in Blender, changing the wings and pulling the back up and reshaping it a bit as well.
I do like metallus and I need a project to get me out of my burnout. I'll give it some serious thought.
One Metallus would be good, but two would be better
:thumbup:
Sent oedi-pus. I'm still looking. I am pretty sure I had Dreadstar at one time.
Thanks Wyldfyre! I'll grab it in a bit.
Oh! This edited helmet could work well... I hadn't seen it.
It seems that this helmet is difficult to skin. I think I'll leave Metallus for now.
I've started doing Starfire. I just need to add the sword and some details. Unfortunately I won't be able to use the computer for a few days.
(https://i.postimg.cc/Lh05zHCM/Clipboard011.jpg) (https://postimg.cc/Lh05zHCM)
(I always have troubles placing swords)
It looks good so far. If you can't get the sword right, go ahead and load it anyway. I should be able to fix that.
On Metallus, are you planning to release what you've got, if you've stopped working on it?
Yes, here it is. When I finish Starfire I'll upload it too. I'm going to have a few busy days.
https://www.mediafire.com/file/cv2tdz650k6wt12/Metallus.rar/file
Thanks Doc. It looks like from the front page that you might have a birthday coming up. If so, hope you have a good one.
Yes, thank you, although I'm not going to celebrate too much.
I forgot the portrait of Metallus. If you download it again now it's ready.
https://www.mediafire.com/file/cv2tdz650k6wt12/Metallus.rar/file
Here is the another Starfire in the DC Universe. It took me longer to fix the sword than to paint the stains on his suit.
(https://i.postimg.cc/rKv6GT2c/Starfire.jpg) (https://postimg.cc/rKv6GT2c)
https://www.mediafire.com/file/bcg13ulsol578be/Starfire_DC_Implosion.rar/file
I like this character. I'm going to do her hero file
https://www.writeups.org/starfire-dc-comics-implosion-2/
Thanks Doc. A character I didn't think would ever be put into FF.
I bought and read a few of the issues when they came out back in the day. Since it was part of the implosion, it wan't around for very long.
Unfortunately, those comics have not been translated in Spain and I have not read them. Now I am trying to make a Stalker skope.
Probably not worth translating as the sales were so low that the market of buyers would be small.
I think just about all of them vanished and were never seen again in the DC universe. I know Claw was though as he had a team up with Red Sonja a few years back.
Thanks for these Doc! I never read most of them either, although I do remember Claw.
For Claw, We will use the Conan of Grenadier.
In Spain, Dreadstar and Arion were published. I don't know if anyone made a mesh of these characters.
I think Stalker is almost done. I have little information about this character for the hero file.
(https://i.postimg.cc/mPJHkbB4/Stalker1.jpg) (https://postimg.cc/mPJHkbB4)
There's some info on him on wikipedia. It looks like he came back for more appearance than I knew about.
I think I only bought and read the first issue back when it came out.
Thanks for doing some of these lost and forgotten characters. Daglob would be happy.
https://en.wikipedia.org/wiki/Stalker_(DC_Comics) (https://en.wikipedia.org/wiki/Stalker_(DC_Comics))
Yes, daglob would be happy!! :thumbup:
Whoa! Stalker, that's an awesome deep cut, and he's looking great!
Thanks Benton! I think I've finished Stalker. I don't know if there's any detail missing.
Here is my version of the Stalker:
(https://i.postimg.cc/9RfQy8hV/Stalker2.jpg) (https://postimg.cc/9RfQy8hV)
https://www.mediafire.com/file/mcowso18r94spop/Stalker.rar/file
Thank you! Downloaded!
Claw the unconquered wears different types of clothes. Which outfit would you prefer? Grenadier did a Conan mesh that is practically the same.
The one from the first few others - the white fur very Conan like outfit
And thanks!
A variation of the great Conan mesh and skin by Grenadier. Claw the Unconquered with the outfit seen in the classic cover.
(https://i.postimg.cc/XZZCTJC5/Claw.jpg) (https://postimg.cc/XZZCTJC5)(https://i.postimg.cc/c6JWXKt1/Claw-the-unconquered.jpg) (https://postimg.cc/c6JWXKt1)
Very nice and quickly done.
Thank you!
Question though... is the sword in the wrong hand compared to the comics?
Oh, for some reason Grenadier put the sword in his left hand. Conan is not left-handed, as far as I know.
Well, good news! I thought it would be harder, but I managed to put the sword in the right hand quite easily.
(https://i.postimg.cc/dLsKLhwc/Claw.jpg) (https://postimg.cc/dLsKLhwc)
Nice! I'm loving these fantasy characters!
Here is Claw the Unconquered:
https://www.mediafire.com/file/klfpnbfqrof3olw/Claw_the_Unconquered.rar/file
For doing the hero file I'm going to use this writeup:
https://www.writeups.org/claw-unconquered-dc-comics-ttrpg-3/
Thank you and downloaded
This monster is interesting, but I don't know if I dare to try to do it.
https://www.writeups.org/nhglthss-damned-claw-unconquered-dc-comics/
Quote from: DoctorRuina on January 08, 2025, 10:31:28 PMThis monster is interesting, but I don't know if I dare to try to do it.
https://www.writeups.org/nhglthss-damned-claw-unconquered-dc-comics/
https://www.mediafire.com/file/5fmhk68mzlzmkwd/NHglths.rar/file
It is only the modeling with 2 static images, it does not have the skeleton but maybe it will be useful to you.
I was experimenting with whether by making the images dynamic with AI I can capture what is dynamic to turn it into a model.
In this case, this version was obtained
(https://i.imgur.com/Kji9AQO.png)
Excellent job Cranlox. I'll have to see about rigging him
Is fantastic, cranlox! Is identical.
I really like this model for N'Hglthss!
On the other hand, Has anyone did a mesh of Arion or Dreadstar? If not, I might try to do them.
There's supposed to be a Dreadstar, but I think its lost.
I don't think Arion has been done.