Possible Projects Interest

[Randomdays]

Thanks Dean. Just keep doing what you're doing.

I checked out SA's stufff already. I went ahead and grabbed a beak from a Donald model I found from a game.

Corrected beak pic below.

[cranlox]

I was trying to import a Donald pickaxe and went out of my way to replace SA's Darkwing head with Donald's, I was thinking about using a deformed Donald face to approximate the villainous character you mentioned, but I usually don't understand that stuff and I left. of theme.
I don't understand the reason why my head is a little dull.
Here I leave you the link to the video of how it turned out.
I also put a Plucky duck head on a Starman that I don't know what it could be used for.

[WyldFyre]

Wow RD! You are really bringing back some Saturday morning memories for me.
Great work!

[Randomdays]

Thanks guys.

Cranlox - Did you adjust the materials lighting on the head? I'm not at home, but there's one of the 4 called "Emissive" I think. Moving the bottom of the triangle to the right usually brightens the nif.

You can also look at the materials properties of the main mesh and try to match the head to those properties.

WyldeFyre - Look for a lot more classic cartoons ( I hope) coming down the road. There's a few that I'd like to grab that you'd have to pay for, but I'm not sure about doing that.

On the one hand, they're fairly unique, would be hard to scope or do from scratch, and not too expensive for the most part, but on the other hand, even a few dollars isn't easy for me right now, and paying anything at all rubs me the wrong way.

Of course, I would gladly accept any donated meshes and rig them up for FF/ FFvt3R.

Case in point, I was trying to adjust a mesh of Scooby to match Dynomutt, but its not going well. So I was thinking about getting the one below at some point.

https://3dexport.com/3d-models/dynomutt

After I get Bushroot done, I'm thinking of doing a few different versions of Amy from Futurama. A base version like the others, with her hoverboard as her special item, a version on her hoverboard linked to a Silver Surfer rig, and a static version of her and Fry in her red convertible sports hovercar.

[cranlox]

I'm going to try to correct that and try some more to figure it out.
I was looking through my downloaded models and I have 1 Scooby Doo and 1 Flintstones Dino. They are one of the most Hanna Barbera style that I found.
I was also importing the head of a prince Erik (from the little mermaid) to a Fandral. (it was acceptable).
Wouldn't it help you to put Chip Squirrel in the skeleton of the SA duck? He is shorter, although he would have less movements.

[Randomdays]

Long reply done, put the forum is having problems with posts again.

Thanks for the help , suggestions and interest.

[Randomdays]

In niftools - if you right click on materials, it should open up a window with the 4 different lighting elements set up as triangles you can move a focal point on to change the lighting. Below are 2 slider bars - one for transparency if alpha is enabled for the nif, and the other for glossiness (shine)

[Randomdays]

Chip - It might have worked better on SA's rig - I'd have to take a look at the armature to see how its setup. The main problem with Chip though was he was not in an easy to work with T- pose, or something similar.

Chip was pretty frustrating and I don't think I want to go back to him for a while. Maybe when I do the Dale you sent - he's in a basic pose and should be easier to work with.

Scooby and the gang - besides the original group that I did with captures from the Gamecube game, those and more are on the models resource site - all in T- pose to work with. I might redo those at some point.

Flintstones, Jetsons, and others - I've got a couple of skinned models from the models resource site, as well as some other classic characters.

Most are stl files. I've also got some models of the Flintstone's and the Jetson's car that I'd like to do with them inside at some point.

[Randomdays]

So I found a site that has free stl files of some animated characters that are for pay on other sites.

It's "PSDLY.com". Not sure how legit it is but trying to download one of the files and see if its real or not.

If so, these are the files I've found there so far. Some of these are high on my list to do with the memories attached to them growing up;

1) Secret Squirrel and Morocco Mole

2) Jonny Quest group diorama - Mainly for Race

3) Dasterdly and Muttley set of 5 characters (flying machine versions)

4) Hong Kong Phooey and Spot in their car

5)The Impossibles

6) Pink Panther and the Inspector

7) Xena

8) Jetsons diorama

9) Herculoids PlaKit - Mainly for Zok and Gllop and Gleep

10) Top Cat diorama

11) Magilla Gorilla

12) Space Ghost and Blip - mainly for a finished Blip

13) Animated Jeannie from the opening credits.

14) Darkwing Duck on the Ratcatcher cycle.

15) Addams family animated diorama

There's also another site "SpecialSTL.com" that has some more of the models I want. These are for pay, but at a much lower price than elsewhere.

Edit - So I've downloaded the Secret Squirrel and the Jonny Quest sets. They appear legit as the zip does have the stl files in it and Secret squirrel looks good in Blender - though once again it will need a lot of poly reducing and will only have simple textures.

The download site only lets you have 1 freedownload per hour, so it will take a while to get the ones I want - plus the files are huge.

You can go to either site and do a search of the above and others to see what they look like after being 3d printed and painted.

[cranlox]

What great discoveries!
I also love all of those characters.
Here I leave my links of the duck that is the one from SA with a new head and the Fandral with Erik's Head
https://www.mediafire.com/file/eqexy7xb9mzqxye/DISNEY_Donald.rar/file
https://www.mediafire.com/file/lfrzokdmys2h5u1/Disney_Erik.rar/file

[Randomdays]

I'm going to finish attaching the Bushroot head to a different body, probably just a male_basic.

I'll post him without a new skin if anyone wants to do a quick one on his body.

Amy will take a back seat for a little bit as some of the new stl files are a higher priority for me;

The Herculoids download turned out to be just Dorno, a chibi style version of him

I did find a copy of the full diorama for just $9, so that might be down the road when I can afford it.

https://3dprintmakerclub.com/product/the-herculoids-3d-printing-stl-files/

1) Blip from Space Ghost - the new model looks good and I'll due to normal and transparent version for him. I had sent a basic monkey to Dean awhile back, but I think he got bogged down on it.

This will complete my set for the group and the Phantom Cruiser.



2) The Frankenstein Jr stl has a mesh of Buzz Conroy on his shoulder. I'll probably put him on a male_12, or maybe a Green Lantern to use his ring.



3) Race Bannon from Jonny Quest - at least a head transplant onto the existing skin, if not a complete import.



4) Secret Squirrel and Morocco Mole - old favorites from when I was a kid.

[Randomdays]

Below... nice, I don't think they've been done for Freedom Force, but a little pricey.

I think Max and Norman wouldn't be hard to do for FF from scratch, but Virgil would be a bit harder to do.

https://www.cgtrader.com/3d-print-models/games-toys/toys/mighty-max-diorama

[Randomdays]

Bushroot final - for me at least. Though I might thin out the arms a bit more.

1) The head, eyes, and hair from the Bushroot stl model

2) Beak from a Donald Duck mesh

3) The body from male_dwarf, thinned out at bit to more normal proportions

4) Skin - kitbashed and simplified from Voodoo Chemist's Floronic Man

5) Feet - modified from the gargoyle Goliath mesh.

6) a simple leaf created by me.

7) uses the male_dwarf kf's

Once its posted, feel free to give him a better skin.

[cranlox]

I will try to make a skin version.
Sometimes I am satisfied with myself and other times I am not. I hope it's a positive case with this memory villain.

[Randomdays]

I thought I had posted already after this, so sorry if this is a double post.

CRanlox - thanks. Be aware, if you aren't already, that I still haven't found out how to setup uv's properly for meshes that don't have one already. The head, hair and eyes are like this from an stl model.

Bushroot posted in the Dizney folder - now with thinner arms.

Moved the other 2 characters there from a different folder - Launchpad and Megavolt.

[Randomdays]

Four vehicle models -

2 Panzer tanks I had done for Benton for his DC mod. Not that its been released, I'll probably release some of the items I had made for him. FFvt3R

A school bus and an ambulance from a vehicle pack on sketchfab. For FF but should work in both games.

Uploaded to the "mounts and vehicles" folder.

[cranlox]

This morning I was continuing with Bushroot and Some Disney Girls in Combat Clothes. I was quite satisfied with the 2 ladies but I was not at all satisfied with Bushroot since what I thought and treated was distorted in several ways.
I'm going to look for another head format to use with it, it seems like the best solution and I'm going to try to use some Pluto eyes that I think could adapt.

[cmdrkoenig67]

LOL! Elsa is going to kick somebody's butt. I love it!

Dana

[Randomdays]

Blip is done!

Used the head from the stl above and placed it on a mesh of a monkey I had found online a while back. I had already rigged it but it needed a little tweaking.

My feeble try on skinning the body included. Reskin away! I already know that in some shots he has red gloves and in others his hands are bare. Since the head is an stl you won't be able to do much with that.

Still trying to figure out skinning on an stl, though I did see somewhere that Blender can't handle that if a mesh is poly reduced Like I do with these files.

Tried to apply alpha  to him for "inviso" mode, but he came out very patchy, as if some of the polys were inside out or doubled.

I looked at Gleek from the Superfriends and his outfit is very similar to Blips. If anyone wants to do an alternate skin of the body, I can adjust the head by pointing the ears and adding a wig.

Also, placed him in the Phantom Cruiser with the rest of the group. Pics below with the glass in place and removed to see them better.

[deanjo2000]

That looks really good. Another to add to my list

[Randomdays]

Thanks Dean.

Now posted in the HB Heroes folder. I left the original skin for the monkey with Blip so you can see what it looks liked before I bashed it into pieces.

Glad to get that project done and it looks pretty good.The rigging on Blip is one of my better jobs I think

I'd love to have the Council of Doom complete, but while Metallus and Moltar could be done, I think Creature King and Spider Woman would be hard to do.

I Think Race Bannon next. I might be able to get by just changing the hair - I think the Doc Savage skin out there might be a good base to match with the existing skin. If I go with the stl maybe the hair alone would do as well.

[cranlox]

Amazing Blip!
Phantom Cruiser very nice but not have keyframes.

I still couldn't get improvements that fit me with Bushroot

I am relatively satisfied with these things.

ELSA
ERIK
ESMERALDA
FINNICK
INS CHUKI
DONALD DUCK
(DONALD IT LOOKS BAD IN THE PREVIEW BUT IN THE FFVS3R GAME IT LOOKS ACCEPTABLE)

I have numerous Fx for each of these characters, with their sounds and voices.
(Finnick can still be made better, maybe he will come back to him)

[cranlox]

Finally, by chance, I found the chip you wanted lost among my files.

HERE TO FOLDER

[Randomdays]

Thanks for the alternate Chip Cranlox!

He was much easier to work with thanks to being on T-pose. I think I like the head/ face of the other model more though, and may do a head swap of the old onto the new.



Also, reupped the Phantom Cruiser with some simple Freedom Force Car kfs.

[cranlox]

It's a pleasure to help by providing the model.
I just found a lot of models that I had downloaded, many from Gijoe rise of cobra, some from Disney, Prince of Persia and Finding Nemo.
Maybe I'll make some vehicles like Dory from the Mirrorverse that I already uploaded but from the other characters.
Among my models I found a head of Cedric the magician who teaches Sofia, who has changed his physical form numerous times, I managed to put it on a starman body with Daglob things so that it looks quite acceptable considering that there is no version of the character . in full model in any gameI share it here.



I know you liked Ducktales, I show you and send you the richest Disney guy, it's the SorceresArena model.

UNCLE RICH

[cranlox]

https://www.mediafire.com/file/nn0v82ne725qt9g/3DISNEY_WITH_THINGS.rar/file
ROBINHOOD MICKEY AND GIRLFRIEND WITH THINGS

[Randomdays]

Thanks Cranlox. Scrooge, the 3 nephews, Donald, Daisy and the rest are coming down the line at some point.

[cranlox]

do you have them? Any model you need, let me know if you can't get it.

[Randomdays]

Yes I do, thanks.

Before I get into doing the next couple of HB characters, I thought I's see if someone here could help with some simple versions

1) Buzz Conroy from Frankenstein Jr - maybe on a male_teens or on a Civilian Boy default mesh



2) Race Bannon from Jonny Quest - either a new skin altogether or just fixing the hair and some tweaks on the one that's already been done. The original skinner just made the hair a basic one-tone white. I'll post that in the requests folder on the megasite for people to look at.



3) Chuck and Nancy from Shazzan - maybe teen_14 or civilian boy again for Chuck. For Nancy, maybe female_hairb

I'll put the teen boy and girls in the requests folder as well. The civilian boys are part of the basic game.

[cranlox]

I would have to get a half-vintage child, I'll look what I have.
I recommend that you perhaps also take into account all your work with the Vikings and those people, you have some skeletons with different movements for shorter and taller characters.
On the other hand, I got the punk & tokka frogs from Tmnt Mutant Madness and several characters from Miraculous and Fortnite for 1 dollar